The first 1S brushless drone with Betaflight OSD integrated by BETAFPV Hobby.
Tip: DSMX rx version is NOT compatible with Spektrum DXe radio transmitter and OrangeRX RF module.
The 0703 motors is the upgraded version. That could stop the motor bell flying off.
About how to create a Model Profile on your Taranis Q X7 for the BetaFPV Beta65 Pro. You will learn how to set your Arm switch and mode switch. Thanks for C Ray Tech great work.
Flexible props protector guard included as show below.
The combo of 0703 motors with 75mm frame and 40mm 4-blades propellers has the best efficiency and could provide a great improvement in power. Really not recommend the 0703 motors with a 65mm frame ( like Beta65 Pro frame or BWhoop B06 etc). Why? The combo of 0703 motors and 31mm props (for 65mm frame) has a really low efficiency. Really not power enough. For the 65mm 1S brushless drone, recommend the 0603 motors (comming soon).
Here is the testing result of different motors and frames combo.
Throttle value means the position when the drone hovers in the air.
Flying time is the time from OSD voltage value 4.3V->2.8V.
All tested with 4-blades props. 31mm props or 40mm props.
All throttle values are tested on full charged 550mAh batteries.
The KV value of 0703/0603 motors are both 15000KV.
This DSMX receiver is NOT compatible with Spektrum DXe radio transmitter and OrangeRXRF module. For some Spektrum radio transmitter like DX6i/DX6e etc, the DSMX receiver may have a horrible range with your radio transmitter, please change the mode to DSM2 (DSMX in default). This issue is figured out by Micro Motor Warehouse.