Free shipping on all orders!
BetaFPV 0703 15000KV Brushless Motors | Raptrc
BetaFPV 0703 15000KV Brushless Motors | Raptrc
Phantom 4 Pro | Raptrc
Phantom 4 Pro | Raptrc

BetaFPV 0703 15000KV Brushless Motors

$46.75

SKU: C8007

These motors are the stock motors for the Beta75 Pro 1S brushless drone. This is the upgraded version that could stop the motor bell flying off.


RECOMMENDED PARTS

Propellers: 40mm 4-blade props

Motors: 0703 brushless motors

Batteries: 550mAh 1S Lipo HV batteries

Frame: Beta75 Pro frame

Really not recommend the these 0703 motors with a 65mm frame ( like Beta65 Pro frame or BWhoop B06 etc). Why? The combo of 0703 motors and 31mm props (for 65mm frame) has a really low efficiency. Really not power enough. For the 65mm 1S brushless drone, recommend the 0603 motors.

Here is the testing result of different motors and frames combo.

 Throttle value means the position when the drone hovers in the air.

Flying time is the time from OSD voltage value 4.3V->2.8V.

All tested with 4-blades props. 31mm props or 40mm props.

All throttle values are tested on full charged 550mAh batteries.

The KV value of 0703/0603 motors are both 15000KV.


SPECIFICATION

Plug:Micro JST-1.25 3-pins connector

Height: 16.2mm

Width: 10mm

Weight: 2.1g ( with connector)

Shaft: φ1.0mm

KV (rpm/V): 15000KV

Voltage: 3.7-7.4V

Battery: 1S lipo battery (2S is not recommended)

Load Current: 1.8-3.8A

Pull: 23-40g

Power: 6.7-28W

Efficient: 3.4-1.4g/W

Usage: for 1S brushless multirotor like Beta75 Pro or BWhoop B06 etc

If you occur the issue of motor not spin up properly, go to BETAFPV Support Freshdesk for Troubleshooting - Motor Doesn't Spin


PACKAGE

4 * BETAFPV 0703 15000KV Brushless Motors

Some M1.6x4 screws (Fit for Beta65 Pro and Beta75 Pro frame)