Free shipping on all orders!
BetaFPV 0603 16000KV Brushless Motors | Raptrc
BetaFPV 0603 16000KV Brushless Motors | Raptrc
Phantom 4 Pro | Raptrc
Phantom 4 Pro | Raptrc

BetaFPV 0603 16000KV Brushless Motors

$46.75

SKU: D8006

These motors are the stock motors for the Beta65 Pro 1S brushless drone. This is the upgraded version that could stop the motor bell flying off.

 


RECOMMENDED PARTS

Propellers: 31mm 4-blade props

Motors: 0603 brushless motors (Just this)

Batteries: 260mAh 1S Lipo HV batteries

Frame: Beta65 Pro frame

Really not recommend the 0703 motors with a 65mm frame ( like Beta65 Pro frame or BWhoop B06 etc). Why? The combo of 0703 motors and 31mm props (for 65mm frame) has a really low efficiency. Really not power enough. For the 65mm 1S brushless drone, high recommend these 0603 motors.

Here is the testing result of different motors and frames combo.

 Throttle value means the position when the drone hovers in the air.

Flying time is the time from OSD voltage value 4.3V->2.8V.

All tested with 4-blades props. 31mm props or 40mm props.

All throttle values are tested on full charged 550mAh batteries.

The KV value of 0703/0603 motors are both 15000KV.


SPECIFICATION

Plug:Micro JST-1.25 3-pins connector

Height: 16.2mm

Width: 10mm

Weight: 1.6g ( with connector)

Shaft: φ1.0mm

KV (rpm/V): 16000KV

Voltage: 3.7-7.4V

Battery: 1S lipo battery (2S is not recommended)

Load Current: 1.8-3.8A

Pull: 23-40g

Power: 6.7-28W

Efficient: 3.4-1.4g/W

Usage: for 1S brushless multirotor like Beta65 Pro or BWhoop B06 etc

 

If you occur the issue of motor not spin up properly, go to BETAFPV Support Freshdesk for Troubleshooting - Motor Doesn't Spin


PACKAGE

4 * BETAFPV 0603 16000KV Brushless Motors

Some M1.6x4 screws (Fit for Beta65 Pro and Beta75 Pro frame)