Z01 AIO 5.8G FPV Camera is customised for Micro FPV quadcopter like Tiny Whoop . With the BETAFPV F3 flight controller and customed plastic holder, you can assemble the FC tower for your Tiny Whoop and no soldering required.
Multiple improvements on the 1.2 version.
Fixed 20° tilt camera mount. At this angle the pilot can still see everything ahead in full speed fast forward flight.
The pin header between the cameras lens and vtx board were fragile and could break easily. So in this V1.2 version we stiffend the connection considerably so it could stand the worst crashes.
Cables with JST 1.25 connector are available for OSD function. So you can use it with brushed FC with OSD function easily.
Attention: this JST 1.25 connector is using for video in and out, do not insert to a battery.
A customed camera holder is included so you can assemble the camera to the frame easily.
Instructions for changing frequency :
Press the button once to change channel. Channel LEDs will skip to next one after single press.
Press and hold button for 4 seconds to change frequency band. Band LEDs will skip to next one accordingly.
Here is the component layout diagram of Z01.
Assemble as a FC tower with BETAFPV F3 flight controller. The FC tower can be used for Beta65, Beta65S and Beta75.
Special Z shape design to withstand worst crashes
5.8G FPV dipole whip high sensitivity antenna for long range and durability
8 LEDs display channel and 6 LEDs display frequency group information